|
140 LH Shown Above
Specifications
- Dimensions: 17"/43cm
- Weight: 35 lbs/16kg (approx.)
- Electric: 115VAC/60Hz/1 AMPS (max.) or 220VAC/50Hz
- Air: 80 to 100 PSI G/3 CFM
- Labels: Standard 4 1/2" web width 10" O.D.
roll with 3" core
Die cut with 1/8" spacing
- Labeling Speed: 1250" continuous web speed per
minute
|
Autolabe's Automatic Tamp-Down Label Applicator applies a pressure
sensitive label utilizing a positive tamp action to ensure complete label
adhesion on the product container or package. Tamp heads of
different material from hard to spongy allow for product variation or
surface differences. The Tamp-Down Applicator may be used in any
direction and a variety of tamp heads are available.
TAMP-DOWN OPERATIONAL SEQUENCE
The product is consistently guided to the applicator and can be moving or
stopped at the point of application. The label is stripped from the
web and is held on a tamp head by vacuum. When the sensor or switch
detects the product, the air cylinder extends pressing the label onto the
product.
Return to: Products
|
