|
130 LH Shown Above
Specifications
- Dimensions: 17"/43cm
- Weight: 35 lbs/16kg (approx.)
- Electric: 115VAC/60Hz/1 AMPS (max.) or 220VAC/50Hz
- Air: 80 to 100 PSI G/3 CFM
- Labels: Standard 4 1/2" web width 10" O.D.
roll with 3" core
Die cut with 1/8" spacing
- Labeling Speed: 1250" continous web speed per
minute
|
Autolabe's Blow-On Applicator is designed for non-contact applications or
where container recessed areas require accurate label placement. The
Blow-On Applicator works at any angle and special rotational mounts are
available. The standard label vacuum grid is 4 1/2" x 4
1/2". Custom vacuum grids can be made to accommodate most label
sizes. The Model 130 Blow-On applicator is ideal for custom
applications where other labeling methods are inefficient.
BLOW-ON OPERATIONAL SEQUENCE
The product is consistently guided to the applicator and can be moving or
stopped at the point of application. The label is stripped from the
web and is held on a blow grid by vacuum. When the sensor or switch
detects the product, the label is blown onto the product with a blast of
air.
Return to: Products
|
